Classic Semi-Pistol Grip Stock Set

*** All wood is sized for 3” chambered shotguns. If you have a 2 ¾” only shotgun you will need to purchase a 3” slide tube in addition to the forend wood in order for it to fit properly. This will not change or alter the function of your shotgun but will be necessary for proper fitment. ***

Typically, our stocks are a direct replacement, however, on older models you may have one complication with replacing the stock due to the length of the tang. See pic below for reference of the tang.

Our stocks are designed to fit a tang no longer than 2” and some older models may have a much longer tang. To find the length of the tang if you don’t already have the stock removed, remove the screws holding the butt plate/pad then using the appropriate socket on an extension, remove the stock retention bolt then remove the stock to expose the tang. If it’s over 2” it will need to be cut down, drilled and re-tapped to accept the bolt once the new stock is installed. If it’s not over 2” then our stock should bolt on without issue.